Professional Lash Lift & Tinting Kit

SUPERSONIC 2.0 Professional Lash Lift Set contains Serum 1 Pink, Serum 2 and Serum 3 Multivitor.
Note! Eyebrow and Eyelash Flexing Expert System «SUPERSONIC 2.0» is designed exclusively for professional use!
Note! Serum 1, Serum 2 and Serum 3 Multivitor must be used in combination.

Expiration date: 24 months
Period after opening (PAO): 6 months

Deep Brow Tint 2.0 allows you to create a brighter shade by applying several layers and provides a clear, expressive imprint.
Colour base:
✔️ 03 BLACK — black
The tint contains a complex based on Heliogenol™ sunflower seed extract, which provides additional care for the hairs.
Thanks to the neutral pH level of the ready-to-use dye mixture, the tinting process does not damage the hairs or dry out the skin.

Expiration date: 24 months
Period after opening (PAO): 3 months

LASH FLEXING PROCEDURE STAGES


1) Diagnosing of the client's lash hairs and determination of the exposure time of the flexing products according to the points listed below:


1-st group: the lash hairs are thick or straight — processing time is 6-10 minutes for Serum 1 and no less than 6 minutes for Serum 2;


2-nd group: the lash hairs are of the medium thickness or thin — processing time is 3-6 minutes for Serum 1 and no less than 6 minutes for Serum 2;



The processing time of Multivitor is 5 minutes for all hairs types.



NOTE! The maximum processing time of Serum 1 and Serum 2 is 15 minutes.


NOTE! The activity of Serum 1 and Serum 2 depends directly on the room air temperature. The higher the temperature, the less the reaction time.



2) Preparing the lashes for the flexing procedure


1. Use ÉLAN DETOX-MOUSSE to cleanse the hairs before the lash flexing procedure. Remove the foam with a cotton pad moistened with water. 


2. Fix the silicone pad of the required size on the upper eyelid.


3. Spread and fix the lashes on the pad with TM ÉLAN professional line fixing gel and an applicator.



3) Creating the lash curl (Serum 1)


1. Apply Serum 1 to the area of the lash curve. The exposure time is 3-10 minutes.



NOTE! The maximum processing time should not exceed the processing time for the selected lash hairs type.



2. After the exposure time has expired, remove the excess of the solution with a dry brush in the direction of lash growth. 



4) Fixing the lash hairs direction (Serum 2)


1. Apply Serum 2 to the entire lash area in a thick layer. The exposure time is 6-10 minutes. 



NOTE! The processing time at the IV stage (Serum 2) should be equal to the processing time at the III stage of creating the lash curl (Serum 1), but no less than 6 minutes.



2. After the exposure time, remove the remnants of the product with a dry brush in the direction of lash growth. 



5) Lash hairs care (Multivitor)


1. Apply Multivitor to the entire lash area. Exposure time: 5 minutes.


2. After exposure time, remove the remnants of the product and fixing gel with a cotton pad moistened with water.



IMPORTANT! To achieve the most expressive effect and visible results, ÉLAN professional line technologists recommend performing a lash tinting procedure after completing the lash flexing procedure.

3. To complete the chemical reaction, including after lash tinting, apply ÉLAN DETOX-MOUSSE 2.0 to the lashes. Remove the foam with a cotton pad moistened with water.
4. Apply ÉLAN professional line COLOUR FIX 2.0 colour fixing fluid to the lashes and brows.

LASH POST-PROCEDURE RECOMMENDATIONS



! It is highly recommended to avoid saunas, solariums and any mechanical damage of the lash curl (sleeping face down on the pillow), reduce the contact of the lashes with water as well as do not brush the lashes for 24 hours after the flexing procedure.

! It is highly recommended to avoid using the aggressive cosmetic products and undergoing the aggressive cosmetic procedures (scrubs, face peels, alcohol based lotions, laser treatments) for 48 hours after the lash flexing procedure.



RESTRICTIONS ON THE PROCEDURE OF LASH FLEXING



Absolute restrictions for the lash flexing procedure: individual sensitivity to the components in the products, any skin damage in the eye area, redness, rashes of any etiology, as well as visiting the solarium, laser and photo procedures 24 hours before the procedure.



PRECAUTIONS



Before use, perform an allergy test: apply 2 drops of each product to a small area of the skin of the elbow bend 48 hours before use. If there is no redness, swelling or irritation on the skin, you can start the flexing procedure.



Serum 1 contains thioglycolate. Serum 2 contains hydrogen peroxide. The products may cause an allergic reaction. Wear protective gloves. Do not use metal objects when handling the products. Avoid contact with eyes. In case of contact with eyes, rinse immediately with water. In case of an allergic reaction, consult a dermatologist.

LASH TINTING STEPS
1) Preparation for the procedure
Use ÉLAN DETOX-MOUSSE to cleanse and degrease the lashes and skin before the eyelash tinting procedure. Remove the foam using a cotton pad moistened with water.

2) Preparing the tinting mixture
Mix «Deep Brow Tint 2.0» with 2% Oxidizing Emulsion in a 1:1 ratio in a non-metallic container.

IMPORTANT! The coloгr of the tint in the bottle/tube may vary from light brown to black due to exposure to air after opening the packaging. This is normal for the dyes in the formula and does not affect the lash tinting result or the reproducibility of the result when the same mixture is used periodically.

3) Tinting the lashes
Apply the mixture evenly to the lashes, avoiding contact with the skin and eyes. Processing time: 5-10 minutes depending on the desired result.
After the designated time, remove the remaining mixture with a cotton pad moistened with water. If the mixture spreads beyond the desired shape, remove excess with a cotton swab moistened with ÉLAN SKIN COLOR REMOVER.

4) Completion of the lash tinting procedure
After rinsing off the tint, apply ÉLAN COLOUR FIX to the lashes to fix the result.

PRECAUTIONS

Oxidizing emulsion contains hydrogen peroxide. Brow tint and booster concentrate contain p-phenylenediamine, toluene-2,5-diamine, and resorcinol. Perform an allergy test 48 hours prior to use: mix 2 drops of tint and 2 drops of oxidizing emulsion and apply to a small patch of skin on the inner elbow. If no redness, swelling, or irritation occurs, the product can be used.

For professional use only. Hair dyes may cause strong allergic reactions. Read and follow the instructions carefully. Not intended for use by persons under 16 years old. Temporary «black henna» tattoos may increase the risk of allergic reactions. Do not use if you:
– have facial rashes or sensitive, irritated, or damaged scalp;
– have had a reaction to hair dye in the past;
– have had a reaction to a temporary «black henna» tattoo.

Use protective gloves. Do not use metallic tools while working with the product. For external use only. Avoid contact with eyes. In case of contact with eyes, rinse immediately with water. Rinse thoroughly after application. In case of an allergic reaction, consult a dermatologist.

«SUPERSONIC 2.0» Serum 1 PINK: AQUA, THIOGLYCOLIC ACID, CYSTEAMINE HCL, CETEARYL ALCOHOL, AMMONIUM HYDROXIDE, ETHANOLAMINE, PROPYLENE GLYCOL, PARAFFINUM LIQUIDUM, ETHYLHEXYL STEARATE, PARFUM, CETRIMONIUM CHLORIDE, MICA, SODIUM ERYTHORBATE, CETEARETH-20, SODIUM SULFITE, DIAZOLIDINYL UREA, METHYLPARABEN, PROPYLPARABEN, DISODIUM EDTA, POLYQUATERNIUM-22, COLLAGEN, IODOPROPYNYL BUTYLCARBAMATE, HYDROLYZED KERATIN, TRIETHOXYCAPRYLYLSILANE, LAUROYL LYSINE, Cl 45410.

«SUPERSONIC 2.0» Serum 2: AQUA, CETYL ALCOHOL, GLYCERIN, CETEARYL ALCOHOL, HYDROGEN PEROXIDE, PARAFFINUM LIQUIDUM, CERATONIA SILIQUA (CAROB) SEED EXTRACT, HYDROLYZED SOY PROTEIN, HYDROLYZED COLLAGEN, POLYQUATERNIUM-7, POLYQUATERNIUM-16, ZEA MAYS (CORN) STARCH, ARGANIA SPINOSA KERNEL OIL, CETEARETH-33, TETRASODIUM EDTA, PHOSPHORIC ACID, SODIUM BENZOATE, BENZOIC ACID, PHENOXYETHANOL, POTASSIUM SORBATE.

«SUPERSONIC 2.0» Multivitor: AQUA, CETEARYL ALCOHOL, GLYCERIN, ISOPROPYL PALMITATE, PARAFFINUM LIQUIDUM, CYCLOPENTASILOXANE, BETAINE, HYDROLYZED WHEAT PROTEIN, HYDROLYZED SOY PROTEIN, CETEARETH-20, PEG-8, PEG-8/SMDI COPOLYMER, SODIUM POLYACRYLATE, CETRIMONIUM CHLORIDE, DIMETHICONOL, BHT, PALMITOYL MYRISTYL SERINATE, PHENOXYETHANOL, ETHYLHEXYLGLYCERIN, PARFUM, CITRIC ACID, BENZYL SALICYLATE, HYDROXYCITRONELLAL, Cl 60730.

Deep Brow Tint 03 BLACK: AQUA, CETEARYL ALCOHOL, ETHOXYDIGLYCOL, DIMETHYLAMINO METHYLPROPANOL, TRIDECETH-2 CARBOXAMIDE MEA, TOLUENE-2,5-DIAMINE SULFATE, GLYCERYL STEARATE, OLEIC ACID, GLYCERIN, CETEARETH -20, P-PHENYLENEDIAMINE, DISODIUM EDTA, PEG-100 STEARATE, HELIANTHUS ANNUUS SEED EXTRACT, LINOLEIC ACID, STEARIC ACID, BUTYLENE GLYCOL, COCAMIDOPROPYLAMINE OXIDE, RESORCINOL, 2,4-DIAMINOPHENOXYETHANOL HCL, 4-AMINO-M-CRESOL, M-AMINOPHENOL, 2,6-DIAMINOPYRIDINE, 4-AMINO-2-HYDROXYTOLUENE, SODIUM ERYTHORBATE, SODIUM SULFITE, UREA, MICROCRYSTALLINE CELLULOSE, XANTHAN GUM, HYDROXYETHYLCELLULOSE, PHENOXYETHANOL, ETHYLHEXYLGLYCERIN, PARFUM.

Oxidizing Emulsion 2%: AQUA, CETEARYL ALCOHOL, HYDROGEN PEROXIDE, GLYCERIN, CETEARETH-20, PARAFFINUM LIQUIDUM, ETHYLHEXYL STEARATE, ARGANIA SPINOSA KERNEL OIL, CETRIMONIUM CHLORIDE, HYDROLYZED COLLAGEN, TETRASODIUM PYROPHOSPHATE, DISODIUM EDTA, SODIUM STANNATE, CITRIC ACID, PHOSPHORIC ACID, SODIUM CARBONATE, SODIUM HYDROXIDE.