Set of KeraVEG Lash Lift System

1. KeraSoft Lash and Brow Lifting Serum Step 1 is designed for the FIRST stage of lash lifting and/or eyebrow lamination procedures:

– softens eyebrow and lash hairs;
– makes the hairs more elastic and pliable, so that they can easily take on a new shape;
– a caring complex based on vegan protein, jojoba oil and trehalose helps to protect eyebrows and lashes during the treatment, preventing them from dehydration and breakage.

2. KeraBoost Lash and Brow Fixing Serum Step 2 is designed for the SECOND stage of the lash lifting and/or eyebrow lamination procedure:

– fixes the new shape and direction of the hairs;
– can be used both as a stand-alone product at this stage (lash lifting without tinting or eyebrow lamination) and together with KeraTint Lash Tint, which allows you to combine lifting and tinting of lashes and significantly reduce the time of the procedure as a whole;
– vegan protein and glycerin have a conditioning effect.

3. KeraTint Lash Tint can be used as a SECOND step in the eyelash lifting procedure (by pre-mixing with KeraBoost Step 2), or as a stand-alone tinting treatment (without lifting):

– provides fast and intensive tinting of lashes;
– allows you to get excellent results thanks to the unique possibility of combining lifting and lash tinting;
– vegan protein and sunflower seed extract provide additional care for the lashes during the treatment.

4. KeraCare Lash and Brow Caring Serum Step 3 is designed for the THIRD step of the eyelash lifting and/or brow lamination treatment:

– provides lashes and eyebrows with intensive care, nourishment and moisturisation thanks to a complex of proteins (vegan and wheat);
– ceramides help strengthen hairs and restore their hydrolipidic balance;
– trehalose and jojoba oil have a protective and antioxidant effect;
– can be used to minimise darkening of eyebrow hairs prior to tinting.

LASH LIFT PROCEDURE STEPS

1) Analyse the lash hairs condition of a client

Specify the processing time and type of the solution – KeraSoft Lash and Brow Lifting Serum Step 1 or KeraSoft Lash Lifting Serum Step 1 according to the instructions below:

1st type: the lash hairs are thick and straight, not having undergone chemical procedures earlier (lash lifting, tinting or bleaching procedures) ‒ KeraSoft Lash Lifting Serum Step 1, processing time is 8‒10 minutes;

2nd type: the lash hairs are of medium thickness or thin, not having undergone chemical procedures earlier (lash lifting, tinting or bleaching procedures) ‒ KeraSoft Lash Lifting Serum Step 1, processing time is 5–7 minutes;

3rd type: the lash hairs are of medium thickness, having undergone chemical procedures earlier (lash lifting, tinting or bleaching procedures) ‒ KeraSoft Lash and Brow Lifting Serum Step 1, processing time is 8–10 minutes;

4th type: the lash hairs are thin, having undergone chemical procedures earlier (lash lifting, tinting or bleaching procedures) ‒ KeraSoft Lash and Brow Lifting Serum Step 1, processing time is 5–7 minutes.

NOTE! The maximum processing time of KeraSoft Lash and Brow Lifting Serum Step 1 and KeraSoft Lash Lifting Serum Step 1 is 10 minutes.

NOTE! The room air temperature directly influences the working speed of the solution. The higher the temperature, the less the reaction time.

The processing time of KeraBoost Lash and Brow Fixing Serum Step 2 is 7 minutes and does not depend on the hairs condition of a client and the processing time of KeraSoft Lash and Brow Lifting Serum Step 1 or KeraSoft Lash Lifting Serum Step 1.

2) Prepare the lashes for the lash lift procedure

2.1 Use «ÉLAN DETOX-MOUSSE» for lash hairs cleansing before the lash lifting procedure. Remove the foam using a cotton pad moistened with water.

2.2 Fix a silicone pad of the appropriate size on the upper eyelid.

2.3 Spread and fix the lashes on the silicone pad using the fixing gel by TM ÉLAN professional line and an applicator.

3) Create the lash curl – KeraSoft Lash and Brow Lifting Serum Step 1 or KeraSoft Lash Lifting Serum Step 1

3.1 Apply KeraSoft Step 1 to the area of curl forming. The processing time is 5‒10 minutes.

NOTE! Processing time and solution type (KeraSoft Lash and Brow Lifting Serum Step 1 or KeraSoft Lash Lifting Serum Step 1) should comply with that indicated for the selected lash hairs type.

3.2 Remove the excess solution with a dry make-up brush in the lash hairs growth direction first, then use a microbrush or a cotton pad moistened with water.

4) Fix the lash hairs direction – KeraBoost Lash and Brow Fixing Serum Step 2

4.1 Fix the lash hairs direction without tinting

4.1.1. Apply a thick layer of KeraBoost Lash and Brow Fixing Serum Step 2 to the entire lash area. The processing time is 7 minutes.

4.1.2 Remove the excess solution with a dry make-up brush in the lash hairs growth direction first, then with a microbrush or a cotton pad moistened with water or «ÉLAN DETOX-MOUSSE». If using «ÉLAN DETOX-MOUSSE», remove the foam using a cotton pad moistened with water.

4.2 Fix the lash hairs direction with tinting on the pad – KeraBoost Lash and Brow Fixing Serum Step 2 + KeraTint Lash Tint

4.2.1 Mix KeraTint Lash Tint and KeraBoost Lash and Brow Fixing Serum Step 2 in the ratio 1:2 in a non-metallic bowl.

NOTE! The product colour in the bottle can vary from light brown to black as a result of the product’s contact with air after the package opening. This is normal for the ingredients in the tint composition and does not influence the lash tinting result.

4.2.2 Apply a thick layer of the mixture to the entire lash area. The processing time is 7 minutes.

4.2.3 Remove the excess solution with a dry make-up brush in the lash hairs growth direction first, then with a microbrush or a cotton pad moistened with water or «ÉLAN DETOX-MOUSSE». If using «ÉLAN DETOX-MOUSSE», remove the foam using a cotton pad moistened with water.

4.2.4 Use ÉLAN COLOUR FIX to secure the obtained result.

5) Lash hairs care – KeraCare Lash and Brow Caring Serum Step 3

5.1 After using KeraBoost Lash and Brow Fixing Serum Step 2 or the mixture of KeraTint Lash Tint + KeraBoost Lash and Brow Fixing Serum Step 2, apply a small amount of KeraCare Lash and Brow Caring Serum Step 3 to the cleansed lashes and spread evenly. Leave until fully absorbed. Do not rinse off.

LASH LIFT POST-PROCEDURE RECOMMENDATIONS

! It is highly recommended to avoid saunas, solariums and any mechanical damage to the created lash curl (e.g. sleeping face down on the pillow), do not brush the lashes for 24 hours after the procedure.

! It is highly recommended to avoid using aggressive cosmetic products and undergoing aggressive cosmetic procedures (scrubs, face peels, alcohol-based lotions, laser treatments) for 48 hours after the procedure.

LASH LIFT PROCEDURE CONTRAINDICATIONS

The absolute restrictions to the lash lift procedure are as follows: an individual sensitivity to the solution ingredients, any skin damage in the eye area, redness, a facial rash of any aetiology, allergic reactions, visiting a solarium or undergoing laser treatments for 24 hours before the procedure.

WARNING

KeraSoft contains thioglycolate and ammonia, KeraBoost contains hydrogen peroxide, KeraTint contains phenylenediamine, phenylenediamine (toluoldiamines), resorcinol. Products can cause allergic reactions. It is necessary to do the allergy skin test before use: apply 2 drops of each solution to a small area of inner elbow skin 48 hours before use. If there is no redness, inflammation or rash, you can perform the procedure.

For professional use only. Read and follow application instruction. Wear suitable gloves. For external use only. Do not use metal objects while working with the products. Avoid contact with eyes. Rinse eyes immediately if products comes into contact with them. In case of an allergic reaction, consult a dermatologist.

KeraTint is not intended for use on persons under the age of 16. Temporary «black henna» tattoos may increase your risk of allergy. Do not tint your eyelashes if:

– you have a rash on your face or sensitive, irritated and damaged scalp;

– you have ever experienced any reaction after colouring your hair or lashes;

– you have experienced a reaction to a temporary «black henna» tattoo in the past.

1. KeraSoft for lashes:
AQUA, THIOGLYCOLIC ACID, CETEARYL ALCOHOL, ETHANOLAMINE, AMMONIUM HYDROXIDE, CYSTEAMINE HCL, PROPYLENE GLYCOL, PARAFFINUM LIQUIDUM, DIMETHYLAMINO METHYLPROPANOL, ETHYLHEXYL STEARATE, SODIUM ERYTHORBATE, ISOPROPYL PALMITATE, CETEARETH-20, ETHYLHEXYLGLYCERIN, TREHALOSE, SIMMONDSIA CHINENSIS SEED OIL, CETRIMONIUM CHLORIDE, DISODIUM EDTA, POLYQUATERNIUM-22, HYDROLYZED VEGETABLE PROTEIN, PHENOXYETHANOL, SODIUM BENZOATE, BENZYL ALCOHOL, DEHYDROACETIC ACID, CITRIC ACID, PARFUM, LIMONENE, LINALOOL.

2. KeraBoost:
AQUA, CETEARYL ALCOHOL, GLYCERIN, HYDROGEN PEROXIDE, CETEARETH-20, ISOPROPYL PALMITATE, PHOSPHORIC ACID, CETRIMONIUM CHLORIDE, CITRIC ACID, ETHYLHEXYL STEARATE, DISODIUM EDTA, TETRASODIUM PYROPHOSPHATE, SODIUM STANNATE, SODIUM CARBONATE, SODIUM HYDROXIDE, HYDROLYZED VEGETABLE PROTEIN, BENZYL ALCOHOL, DEHYDROACETIC ACID.

3. KeraTint:
AQUA, CETEARYL ALCOHOL, TRIDECETH-2 CARBOXAMIDE MEA, DIMETHYLAMINO METHYLPROPANOL, PROPYLENE GLYCOL, GLYCERIN, GLYCERYL STEARATE, CETEARETH -20, P-PHENYLENEDIAMINE, TOLUENE-2,5-DIAMINE SULFATE, RESORCINOL, PEG-100 STEARATE, 2,4-DIAMINOPHENOXYETHANOL HCL, M-AMINOPHENOL, DISODIUM EDTA, SODIUM ERYTHORBATE, UREA, COCOAMIDOPROPYLAMINE OXIDE, MICROCRYSTALLINE CELLULOSE, XANTHAN GUM, PHENOXYETHANOL, ETHYLHEXYLGLYCERIN, BUTYLENE GLYCOL, HELIANTHUS ANNUUS SEED EXTRACT, HYDROLYZED VEGETABLE PROTEIN, BENZYL ALCOHOL, DEHYDROACETIC ACID, MICA, PARFUM, CI 77491.

4. KeraCare:
AQUA, CETEARYL ALCOHOL, GLYCERIN, HYDROGENATED POLYISOBUTENE, DICAPRYLYL ETHER, CETYL ESTERS, TREHALOSE, PHENOXYETHANOL, ETHYLHEXYLGLYCERIN, GLUCOSYL CERAMIDE, PHOSPHOLIPIDS, ACRYLATES/C10-30 ALKYL ACRYLATE CROSSPOLYMER, CHOLESTEROL, SODIUM HYDROXIDE, CETEARETH-20, SIMMONDSIA CHINENSIS SEED OIL, HYDROLYZED WHEAT PROTEIN, HYDROXYETHYLCELLULOSE, HYDROLYZED VEGETABLE PROTEIN, TOCOPHEROL, POTASSIUM SORBATE, BENZYL ALCOHOL, DEHYDROACETIC ACID, SODIUM CHLORIDE, SODIUM SULFATE, PARFUM, CITRIC ACID, CI 61570, CI 47005.