Фарба для брів «Deep Brow Tint 2.0» 04 ICY cold brown (10 мл)

Переваги «Deep Brow Tint 2.0»:

– гарантує насичене фарбування волосків;

– фарбувальна суміш має нейтральний водневий показник (pH), тому під час процедури волоски не травмуються, а шкіра не пересушується;

– у складі є комплекс на основі екстракту насіння соняшника Heliogenol™, який забезпечує волоскам додатковий догляд;

– фарба має приємний запах, що дозволяє зробити процес фарбування комфортнішим.

Термін придатності: 24 місяці
Термін придатності після відкриття: 3 місяці

STAGES OF EYEBROW TINTING

1) Preparation for the Tinting Procedure

Use ELAN DETOX-MOUSSE to degrease the hairs and skin before eyebrow tinting or shaping procedures. Remove the foam with a cotton pad moistened with water.

2) Brow Shaping

Shape the eyebrows using any suitable product for this purpose.

3) Preparation of Tinting Mixture

Mix «Deep Brow Tint 2.0» eyebrow tint with 2% Oxidizing Emulsion in a 1:1 ratio in a non-metallic container. If you need to deepen and intensify the colours of the main palette or create a new shade, use the corresponding «Eyebrow Tint Colour Booster 2.0» according to the mixing ratio below:

Eyebrow tint (49%) + oxidizing emulsion (49%) + booster concentrate (2%) = tinting mixture (100%)

NOTE! The colour of the tint in the bottle/tube may vary from light brown to black due to product exposure to air after opening the packaging. This variation is normal for the dyes used and does not affect the result of eyebrow tinting or the consistency of this result with repeated use of the same tinting mixture.

NOTE! The more booster concentrate used, the closer the final shade will be to the colour of the booster (blue or orange).

4) Eyebrow Tinting

Apply the tinting mixture to the eyebrows according to the desired shape. Depending on the desired result, leave the tint on for 5-10 minutes. After the specified time, remove any excess tint using a cotton pad moistened with water. If the tint has gone beyond the desired shape, remove the excess with a cotton swab moistened with ELAN SKIN COLOR REMOVER.

5) Completing the Eyebrow Tinting Procedure

To set the achieved result, apply ELAN COLOUR FIX to the eyebrows.

PRECAUTIONS

The oxidizing emulsion contains hydrogen peroxide. The eyebrow tint and booster concentrate contain p-Phenylenediamine, p-Phenylenediamines (toluene diamines), and resorcinol.

Before use, 48 hours prior, it is necessary to perform an allergy test: mix 2 drops of tint and oxidizing emulsion and apply the mixture to a small area of ​​the skin on the elbow bend. If there is no redness, swelling, or irritation on the skin, you can proceed with coloring.

For professional use only. Hair dyes can cause severe allergic reactions. Read and follow the instructions carefully. This product is not intended for use by persons under the age of 16. Black henna temporary tattoos may increase the risk of allergy.

Do not use the tint if you have:

– a rash on the face or sensitive, irritated, or damaged scalp skin;

– experienced any reaction after hair coloring;

– had a reaction to black henna temporary tattoos in the past.

Use protective gloves. Avoid using metallic objects when working with the product. Do not apply to eyelashes. For external use only. Avoid contact with eyes. If the product gets into your eyes, rinse them immediately with water. Thoroughly rinse off after application. In case of an allergic reaction, be sure to consult a dermatologist.

AQUA, CETEARYL ALCOHOL, ETHOXYDIGLYCOL, TRIDECETH-2 CARBOXAMIDE MEA, DIMETHYLAMINO METHYLPROPANOL, TOLUENE-2,5-DIAMINE SULFATE, GLYCERYL STEARATE, GLYCERIN, CETEARETH-20, P-PHENYLENEDIAMINE, DISODIUM EDTA, 4-AMINO-M-CRESOL, PEG-100 STEARATE, HELIANTHUS ANNUUS SEED EXTRACT, BUTYLENE GLYCOL, COCAMIDOPROPYLAMINE OXIDE, 2,4-DIAMINOPHENOXYETHANOL HCL, RESORCINOL, 2,6-DIAMINOPYRIDINE, SODIUM ERYTHORBATE, SODIUM SULFITE, UREA, MICROCRYSTALLINE CELLULOSE, XANTHAN GUM, PHENOXYETHANOL, ETHYLHEXYLGLYCERIN, PARFUM